Escea IB600 Manuel d'installation

G8860_2 Installation Manual AUS IB850 and IB600 Installation Manual AUSTRALIAN EDITION Important: The appliance shall be installe

G8860 _2 Installation Manual AUS 1010.2 The Outer Skin Kit has 4 possible entry points for solid gas pipe, on the four corners of the kit. Each is

G8860 _2 Installation Manual AUS 11 11.2 Attach the Rear to the Sides and Base: The rear panel fits inside the Side and Base panels, make sure the

G8860 _2 Installation Manual AUS 1212.0 Fix the Outer Skin Kit (OSK) into the cavity: Slide the OSK into the cavity, ensuring the gas pipe passes t

G8860 _2 Installation Manual AUS 1315.0 Removing the front glass: Step 1: Unscrew the top glass retainer and remove it. Take care that the glass

G8860 _2 Installation Manual AUS 14 4) For best access we recommend removing the fire box. Undo the four screws on the front four corne

G8860 _2 Installation Manual AUS 15 16.1 16.2 Note: If installing a flue system into a framed timber wall the outer liner should not come d

G8860 _2 Installation Manual AUS 16 18.0 Fixing the Heater to the base and wall: There are several ways that the heater can be fixed against moveme

G8860 _2 Installation Manual AUS 17 19.0 Locating the log set: 1) Remove packaging from around log sets 2) Place rear log (long rectangular one)

G8860 _2 Installation Manual AUS 18 19.1 Log Replacement: The fire unit should never be used with broken logs. Turn off the fire and allow the unit

G8860 _2 Installation Manual AUS 19 21.0 Checking Operating Pressure: WARNING: The regulator that is supplied with the fire MUST NOT BE REMOVED. R

G8860 _2 Installation Manual AUS 2Note: THERE ARE A FEW THINGS TO CONSIDER BEFORE INSTALLATION • Cavity Dimensions, Clearances, and fitting the Ou

G8860 _2 Installation Manual AUS 2022.0 Fitting the Fascia Panels: To avoid scratches or knocks to the fascia panels of this heater they must be fi

G8860 _2 Installation Manual AUS 2122.1 When installing a 4 sided fascia ensure that the clips that the outer fascia screw into are at the bottom o

G8860 _2 Installation Manual AUS 2224.0 Normal Operating Sounds and Smells; Note: Each time the fire is lit from cold the glass will fog up with c

G8860 _2 Installation Manual AUS 2325.0 Installation Check List: 1 Ensure there is adequate ventilation in the masonry cavity.__ 2 Ensu

G8860 _2 Installation Manual AUS 3Contents: Section: • Product Description 1.0 • Creating the Outer Skin Kit Cavity

G8860 _2 Installation Manual AUS 4CABCAB550560600270130301060560637475 425900960560 5101653504 Sided3 Sided610575580623270 13040 = = 6078177105606

G8860 _2 Installation Manual AUS 53002001001502.2 When fitting the heater, the first thing installers MUST do after unpacking the fire is to bend a

G8860 _2 Installation Manual AUS 61043mm2085mm560mm960mm492mm492mmMAINTAIN CLEARANCES45°915mm1830mmMAINTAIN CLEARANCES45°560mm710mm398mm398mm7.0 Co

G8860 _2 Installation Manual AUS 78.0 Power Supply: Locating the plug within the cavity makes the installation very neat but the provision must

G8860 _2 Installation Manual AUS 89.0 Installing the Flue System: Non-Masonry Cavity: The heater must be flued to the outside via a 100mm diameter

G8860 _2 Installation Manual AUS 9FROM AS5601, please ensure compliance to all other relevant sections of this code. 2.6.13 FLUE TERMINALS 2.6.13.